Emerson EWC19DA TV DVD Combo User Manual


 
- 23 - EN
1B17
1 Press the FWD
gg
or REV
hh
button during
playback. (The sound for DVD is muted.)
For DVDs, pressing the FWD g or REV h
button cycles the playback speed in three steps.
For audio CDs, the playback speed is fixed.
2 Press the PLAY button to return to normal
playback speed.
FAST FORWARD/REVERSE
DVD CD
Ex2
Ex8
Ex32
Dx8
Dx32
Dx2
E
D
REV Button Button
FWD
1 Press the FWD
gg
button while playback is
paused. (Sound remains muted.)
Slow motion mode will be activated.
Pressing the FWD g button cycles the playback
speed in three steps. Select an appropriate speed
while referring to the speed indication on the
screen.
2 Press the PLAY button to return to normal
playback speed.
NOTES:
Slow playback is not available with audio CDs.
The reverse of slow playback is not available.
SLOW MOTION
DVD
1/16
1/8
1/2
D
Button
FWD
1 Press the number buttons to enter the desired
track number.
The selected track will be located, and playback
will start.
You can also press the SEARCH MODE button, use
the number or K/L buttons to enter the track number,
and then press the PLAY button.
Pressing the SEARCH MODE but-
ton during playback causes the cur-
rent track number to be displayed in
square brackets.
SEARCH/TRACK
TOTAL TRACKS: 07
TRACK [ 6 ]
Start Exit
_
TRICKS WITH THE SKIP BUTTONS
(H, G)
If the SKIP button G is pressed during playback
or while playback is paused, the current track is
skipped and the next track is played. When the
SKIP button H is pressed once, the top of the cur-
rent track is located for replaying. When the SKIP
button H is pressed again while playback is
paused, the previous track is located. Each time the
SKIP button H is pressed while playback is
paused, the disc is searched backward track by
track. Once playback has started, pressing the SKIP
button H locates the top of the current track.
STARTING FROM A DESIRED
TIME COUNT
DVD CD
1 Press the SEARCH MODE
button.
Press the button three times for
DVDs or two times for audio
CDs.
2 Press the number buttons to set the desired
time count.
Example: 1 hour, 23 minutes and
30 seconds
1+10+103
+10+10+100
To enter 0 (zero), press the num-
ber 0 (zero) button or press the B button.
3 Press the PLAY button. Playback will then
start from the set time count.
NOTES:
Playback from a desired time count is not available
with some discs.
Specific time playback is not available with some
discs or if the unit is in stop mode.
STARTING FROM A DESIRED
TRACK
CD
SEARCH/TIME
TOTAL TIME 1h23m45s
TIME [ _h__m__s ]
Start Exit
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h23m30s]
Start Exit
_
TD205.QX33 01.3.3 1:39 PM Page 23