Filter
Top Products
- 26 - EN
1C29
PLAYBACK
NORMAL PLAYBACK
Make sure ...
•
The unit is turned on.
1 Insert a prerecorded tape
If the erase-protection tab has been removed, the unit
will start playback automatically.
2 To begin playback
Press the PLAY button.
3 To stop playback
Press the STOP button when play-
back is completed.
NOTES:
•
If you press the PLAY button (of the TV/VCR side)
in the DVD mode, you can start the VCR playback.
•
If you press the SELECT button during the VCR
playback, it will stop and the mode will change to
the DVD mode. In addition, the same function
operates with the DVD side PLAY button or the
OPEN/CLOSE button.
TV/VCR
TRACKING ADJUSTMENT
•
Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback.
•
However when playing pre-recorded tapes or tapes
recorded on other VCR, noise lines (black and white
streaks) may appear on the playback picture. If this
occurs, you can adjust the tracking control manually
by pressing the CHANNEL button K or L until the
streaks disappear. To return to the DTR function,
stop the tape once and start playback again.
•
You can reduce the noise lines by pressing the
CHANNEL button K or L in slow mode too.
Tracking adjustment in Slow mode will not be set
automatically.
TV/VCR
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD
g or REW h button during play-
back. (in SP / LP / SLP modes)
NOTE:
•
If you press the F.FWD or REW button on the front
panel in the DVD mode, the VCR forward or
reverse will start. Please press the STOP/EJECT
button once to stop it, twice to eject it.
2)Press it again and the unit will now search in super
high speed. (in the LP / SLP modes only)
NOTE:
•
Tapes recorded in SP or LP mode will display a
noise bar on the TV screen and the picture may
revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
TV/VCR
STILL PICTURE
You can view a still picture on the TV screen during
playback (the Still mode). Press the PAUSE button
during playback. Only tapes recorded in SLP mode
will show the least amount of lines. Press the PLAY
button to return to playback.
NOTES:
•
You can advance the picture one frame at a time by
pressing the PAUSE button during Still mode.
•
If it is left in the Pause mode for more than 5 min-
utes, the unit will automatically switch to Stop
mode.
TV/VCR
VERTICAL HOLD CONTROL
In Pause/Still mode only, when the picture begins to
vibrate vertically, stabilize the picture by pressing the
CHANNEL button K or L.
NOTE:
If there are video noise lines on the screen, see
TRACKING ADJUSTMENT.
TV/VCR
SLOW MOTION
Press the PAUSE button, then press the F.FWD g
button to start the playback in slow motion. The unit
mutes the sound during slow motion. Press the PLAY
button to return to normal playback.
NOTE: If it is left in Slow mode for more than 5 min-
utes, the unit will automatically go into Stop mode.
TV/VCR
PLAY
B
STOP
T0052UC(p1-35).QX3 04.9.16 2:13 PM Page 26