Filter
Top Products
–
40
–
EN
01A11
SPECIAL PLAYBACK FUNCTION
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function press the
REPEAT button during playback.
¡The repeat mode changes as described below every
time you press the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat
off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK/ALL
To activate the repeat function press the
REPEAT button during playback.
¡The repeat mode changes as described below every
time you press the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat
off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat A-B
playback.
REPEAT A-B
1 Press the REPEAT A-B button at your cho-
sen starting point.
¡“ A-” appears briefly on the TV screen.
2 Press the REPEAT A-B button again at your
chosen end point.
¡“ A-B” appears briefly on the TV screen and the
repeat sequence begins.
3 To exit the sequence, press the REPEAT
A-B button.
NOTES:
¡The repeat A-B section can only be set within the cur-
rent title (for DVDs) or current track (for Audio CDs).
¡Repeat A-B is not available with some scenes in DVD.
¡To cancel the A point which was set, press the
CLEAR button.
¡Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
CD
DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In stop mode, press the MODE button.
¡The PROGRAM screen will appear.
2 Press the Arrow button (K/L) to select a
track, then press the
ENTER button.
¡Press the CLEAR button to
erase the most recently entered
program.
3 Repeat step [2] until you have selected all
the tracks you want to play in the program.
4 Press the PLAY button to play the pro-
grammed tracks.
NOTES:
¡While the program is being played back, the STOP
works as follows.
¡Press the STOP button once and then the PLAY but-
ton again, playback will restart from the point where
the STOP button was pressed. (Program continued)
¡Press the STOP button twice and then the PLAY
button again, playback will restart from the track in
the usual way. (Program canceled)
¡Up to 99 programs can be entered.
¡To erase all tracks in the program at once, select
ALL CLEAR at the bottom of the list at Step [2].
¡
I
f you like to repeat the current track in the program,
press the REPEAT button repeatedly until “ TRACK”
appears during playback. If you like to repeat the entire
program press the REPEAT button repeatedly until
“ ALL” appears during playback.
CD
TOTAL
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, press the MODE button twice.
¡RANDOM screen appears.
2 Press the PLAY button to start random playback.
NOTE:
¡If you like to repeat the current track in the random
selection, press the REPEAT button repeatedly until
“ TRACK” appears during playback. If you like
to repeat the entire random selection press the
REPEAT button repeatedly until “ ALL” appears
during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
T0052UC(P36-52).QX3 04.9.16 2:12 PM Page 40