Filter
Top Products
32
Recording
Timer Recording (cont’d)
10
Hit [ENTER] when informa-
tion is entered.
Your program setting will be stored.
• To set another program, repeat
steps 4 to 10.
• To exit, hit [SETUP].
•
When programs are overlapped,
“Overlap” and the overlapped
program numbers will appear on
the display.
11
Hit [T-SET].
The unit will be set in the timer
standby mode.
indicator will appear on the
front display.
•
“VCR” will appear if VCR Timer
Recordings have been set.
1
Hit [T-SET].
indicator disappears from the
front display.
2
Hit [TIMER PROG.].
Timer Programming list will appear.
3
Check the information on the
list you will need.
4
To clear the timer programming:
Using [K / L], select the pro-
gram. Hit [CLEAR].
To correct the timer program-
ming:
Using [
K
/
L]
, select the pro-
gram. Hit [ENTER].
Next, correct the timer program-
ming using [K / L / { / B].
Finally, hit [ENTER] again.
5
Hit [TIMER PROG.] to exit.
6
Hit [T-SET] to return to the
timer standby mode.
Timer Programming
2. ---
3. ---
4. ---
1. ---
DVD
VCR
VCR DVD
Checking, canceling or correcting the timer programming
information
Note
• Hit [TIMER PROG.] to
confirm the timer program-
ming.
- When the Timer Recording is
in progress, that program will
be highlighted in red. In this
case, you cannot select any
other program for correction
or add any new programs.
- You cannot select any pro-
grams for correction or add
new programs while the unit
is in timer standby mode.
• The unit will be turned on
automatically before the
recording time.
Hit [STOP C] to stop the disc recording or [STOP C / EJECT A]
to stop the videotape recording on the front panel of the main unit.
[STOP C] on the remote control is not effective.
To stop the Timer Recording in progress
If the timer program did not complete correctly, the error
number appears on the timer programming list.
POWER
T-SET
TIMER PROG.
OPEN/CLOSE
SPACE
123
456
78
0
9
CH
VIDEO/TV
.@/:
ABC DEF
GHI JKL MNO
PQRS
DISPLAY
TUV WXYZ
SETUP
RETURN
MENU/LIST
TOP MENU
CLEAR
ENTER
10
11
POWER
T-SET
TIMER PROG.
OPEN/CLOSE
SPACE
123
456
78
0
9
CH
VIDEO/TV
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
DISPLAY
TUV WXYZ
DVD
REC/OTR
VCR
SETUP
RETURN
MENU/LIST
TOP MENU
CLEAR
ENTER
6
4
2
5
1
• A program with the error number is grayed out and asterisked on the timer programming list.
• Once the timer programming list with error indication is displayed, the program line(s) with error will be
cleared only after the programs are cancelled and reset to the timer standby mode.
Hit [CLEAR] to erase the
selected program.
Each error number means:
E1-22, E37-39 Recording error
other than below
E23-24 Unrecordable disc
E25-28 Copy prohibited program
E29 Disc protected
E30 Disc full
E31-32 Already 99 titles recorded
E33 Already 999 chapters
recorded
E34 No space for Control
information
E35 PCA full
E36 Already finalized Video
format disc
E40 Some portion has not
been recorded because
of program overlapping.
Recording did not start
at the start time.
No Videotape is inserted.
Videotape ran out during
recording.
E41 Power failed
E42 No disc when recording
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
*
JAN/01 12:57AM 1:57AM 8 DVD E22
Date Start End CH Speed
DVD
VCR
VCR DVD
E9600UD_EN/SP.qx3 05.4.25 15:56 Page 32