Filter
Top Products
CONNECTIONS
If using an antenna, follow the instructions on pages 10 and 11. If you are a cable TV (CATV) subscriber,
skip ahead to page 12 for proper connections.
Antenna to VCR connection; The VCR must be connected "between" the antenna and the TV. First, remove
the antenna from the TV and connect it to the VCR. Then connect the VCR to the TV. Below are 3 common
methods of connecting an antenna system to a VCR. Find the type of antenna system you are using and
follow the connection diagram. After you have connected the antenna to the VCR, connect the VCR to the
TV as described on the next page.
This VCR has a single 75 ohm antenna input for connection to an antenna (VHF/UHF) or cable (CATV) sys-
tem. If you have separate VHF and UHF antennas (number 3 below), use a mixer to connect the antennas
to the VCR.
Combination VHF/UHF Antenna with 75 ohm coaxial cable
10
1
RF OUT
ANT. IN
75 Ohm Coaxial Cable
To TV
OUT
IN
VIDEO
AUDIO
CH
3
4
Combination VHF/UHF Antenna with 300 ohm twin-lead (Flat) wire
2
300-75 Ohm Matching
Transformer (Not Supplied)
300 Ohm Twin-Lead Wire
RF OUT
ANT. IN
To TV
OUT
IN
VIDEO
AUDIO
CH
3
4
Separate VHF and UHF Antennas
IF USING A VHF OR UHF ANTENNA, SET THE TV/CATV MENU OPTION TO THE "TV" POSITION.
3
Combiner
(Not Supplied)
To TV
RF OUT
ANT. IN
OUT
IN
VIDEO
AUDIO
CH
3
4