ON-SCREEN TIMER PROGRAMMING (CONTINUED)
OPERATION (SINGLE PROGRAMMING)
30
Press the MENU key on the remote control. The
Menu screen appears.
Press the number key 1 to enter the Timer
Recording mode.
1
To select the desired programming type press the
number key 1, 2, 3 or 4.
In this example, select number 1 for one time pro-
gramming.
NOTE:Daily,Weekdays and Weekly programming
process are same as one time’s.
3
To select "Make a New Program" mode, press the
number key 1.
2
Press the number keys to select the desired
Channel (06).
While the VCR is in the CABLE mode, if a channel
over 100 is desired, press 100's key and then the
next 2 digits in order.
4
Press the number keys on the remote control to
set the Hour (04).
5
Press the number keys to set the Minute (30).
6
Press the number keys to select the AM or PM (1
or 2).
7