Filter
Top Products
BASIC PLAYBACK
Set the CH 3/CH 4 switch on the rear of the VCR to either CH 3 or 4, and then tune your TV to the same.
Upon inserting a prerecorded cassette, the power will turn on automatically even if the power is off.
Press the PLAY key, and playback will start. When loading a tape without the
erase prevention tab intact, playback will start immediately.
The tape is rewound automatically to the beginning after playing to the end
of tape.
Press the STOP key.
The tape will stop but remain fully loaded and ready to play.
Press the FF key in the STOP mode. The tape advances at high speed
without picture and sound.
Press the REW key in the STOP mode. The tape is rewound at high speed
without picture and sound.
Press the EJECT key on the remote control or press the STOP/EJECT key twice
on the front panel.
The tape will eject from the compartment.
PREPARATION
LOADING
PLAY
STOP
FAST FORWARD
REWIND
EJECT
18