Filter
Top Products
Unpacking the Module
3-2 Installation
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the tape seal on the non-conductive bag to remove the module.
4. Perform a visual inspection of the module for any signs of physical damage. Contact Enterasys
Networks if there are any signs of damage. Refer to Getting Help for details.
Table 3-1 Contents of Module Carton
Item Quantity
One module, either the 5H102-48 or the 5H103-48 1
Antistatic Wrist Strap 1
RJ21 Angle Adapter 4
Manual Accessory Kit 1