Filter
Top Products
59
Settings and
Adjustments
Option page
Info page
Setting Item Setting Contents
Mic Input Level Adjust if the Mic Input Level is too low to hear from the projector’s
speaker, or if the level is too high making the audio crack. When the
Mic Input Level is turned down to “0”, no audio is output from the
speaker.
User Button You can select the item assigned from the Visual Setup menu with
the remote control's . By pressing the the assigned
menu item selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments. You can assign one of the
following five items to the .
Power Consumption, Info, Zoom, Resolution, Ceiling Projection
Child Lock
Use on the main unit to lock the power-
on.
On: Starts the Child Lock. To turn the power supply on, hold
down on the main unit for approximately 5 seconds or
hold down on the remote control.
Off: Cancels the Child Lock.
High Altitude Mode
Set this mode when you use this unit at high
altitudes.
When using this unit at high altitudes, that is 1500 meters or more
above sea level, turn this mode “On”.
Item Contents
Information
Displays the
current status.
Lamp Hours: Total usage time of the lamp. 0H is displayed for 0 to 10 hours. Changes to units of
1 hour at 10 hours and above. The display turns yellow text when it is time to
change the lamp.
Source: Displays whether standard DVD player images are being projected, or images from
external video equipment or a computer are being projected.
Video Signal:This is displayed when “Video” is selected as the “Source”, and displays the format
of the video signal being input.
Resolution: The resolution is displayed if the “Source” is other than “Video”. The resolution of
image signals from a computer and the component video signals that are being input
are displayed.
Status: Displays any error information. You may be asked for this information when you
contact your service center.
Reset Lamp
Hours
After you have replaced the unit lamp, initialize the lamp hour settings. The accumulated lamp
operating time is cleared.