Filter
Top Products
70
6
Tighten the lamp attachment screws firmly.
7
Install the lamp cover.
Resetting the lamp operating time
After the lamp has been replaced, make sure you initialize the Lamp Hours
setting.
The unit has a built-in counter that keeps track of the lamp operating time and
the lamp replacement message is displayed based on this counter.
1
Connect the power cable, and press .
2
Press and when the menu appears, set the “Info” to
“Reset Lamp Hours”.
• Install the lamp and the lamp cover securely. If the lamp or the lamp cover is not
installed correctly, this unit will be turned off as a safety precaution.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling.
Do not dispose of it with normal waste.