Filter
Top Products
PAGE 34
EWP-2000 V2 User’s Manual
SETTING THE SCREEN SAVER PREFERENCES
Screen Savers are provided for each source mode. Screen Savers provide two
important functions, to prevent a static image from being displayed on the video
output device for extended periods of time and to provide useful information to
the user when activated.
Follow these steps to set your screen saver preferences:
1. Select the SETUP button to display the Setup menu.
2. Select the Screen Saver Menu item.
3. Select your Screen Saver Preferences
Activation Idle Time
You can specify the amount of idle time that FireBall will wait before activating
the screen saver from 1 to 60 minutes.
Warning: Some televisions and plasma monitors are more susceptible to screen
burn-in than others, therefore, we recommend using a low activation time (like 1
minute) to reduce the risk of burn-in.
Mode
Select either the Normal mode or Product Demonstration mode. The Normal
mode displays the current title or station information while the Product
Demonstration mode is intended for retail product demos during idle time.
SETTING YOUR TIME ZONE
Specify which time zone your FireBall is located in.
Follow these steps to set your Time Zone:
1. Select the SETUP button to display the Setup menu.
2. Select the Time Zone Menu
3. Select your select your Time Zon
e.
Setting User Preferences