Filter
Top Products
PAGE 4
EWP-2000 V2 User’s Manual
PRODUCT INTRODUCTION
Thank you for purchasing the FireBall EWP-2000 V2, the two-way wireless
web tablet from Escient. The EWP-2000 V2 is a wireless remote control touch
screen that provides two way interactive control of any FireBall product that
supports the FireBall Web Interface. The EWP-2000 V2 allows the user to
control a FireBall without using the handheld remote control or TV display.
Almost all of FireBall’s features are accessible directly from the EWP-2000
V2’s high resolution touch screen interface.
ABOUT THIS MANUAL
This FireBall EWP-2000 V2 User Manual is intended to provide the reader with
an overview of the main features and benefits of the Escient FireBall EWP-
2000 V2 web pad as a wireless remote control device for a FireBall Media
Management Server. For more information about the FireBall product line,
please refer to the Escient FireBall User’s Manuals available on the Escient web
site
(www.escient.com) or contact your Escient dealer.
RECORD YOUR SERIAL NUMBER
The serial number for this unit is located at the rear of the device. Please record
the serial number in the space provided below. Refer to it whenever you call
upon your Escient dealer regarding this product.
FireBall EWP-2000 V2 Serial Number: _______________________
MANUAL DISCLAIMERS
At the time of printing, the FireBall EWP-2000 V2 screen shot images in this
manual matched the FireBall EWP-2000 V2 interface screens. However, since
FireBall Media Managers and the EWP-2000 V2 have the capability to install
software updates and enhancements on a regular basis, the resulting screen
updates may no longer match the images in this manual. Check the Escient
website for more information on software updates.
REGULATORY NOTICES
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. To identify this device, refer to the part,
series, or model number on the product.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference with radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference as follows:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Plug the equipment into an outlet on a circuit different from the one
connected to the receiver.
• Consult the dealer or an experienced radio or television technician.
CE (EU) Declaration of Conformity
This product conforms to the essential protection requirements of the
European Council Directive 89/336/EEC that relates to electromagnetic
compatibility, EN55022:1998, Class B; and EN61000- 3-2, 3-3, 4-2, 4-3, 4-4,
4-5, 4-6, 4-8, and 4-11.
Modifications
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Escient can invalidate
FCC approval.
Product Introduction