Filter
Top Products
PAGE 41
EWP-2000 V2 User’s Manual
In addition to manually loading and recording CDs one by one using the front
panel CD drive, you can record as many CD as you want directly from your
external changers.
The advantage of recording multiple discs from your changers is that you don’t
have to sit there and unload/load each disc after it’s recorded, however there is
the disadvantage that external recording must occur in real-time, at 1x record
speeds, taking up to several weeks to complete for large music collections.
External Changer recording uses the same recording preferences mentioned
above in the “Selecting the Audio Encoder Type” and “Handling duplicate
Tracks” sections.
Note: Make sure you have both the digital and analog audio connections from
your changers connected to FireBall. FireBall will use the digital inputs first,
but if there is digital copy protection on a CD, FireBall will then attempt to use
the analog audio inputs to record the protected CD.
Automatically Recording CDs
You can easily record changer based CDs to your FireBall’s internal hard drive
using the Quick Record feature. Quick Record will record all tracks from newly
added CDs which are NOT already record to your FireBall, in one easy step.
Follow these steps to automatically record changer CDs to your FireBall:
1. Select the SETUP button to display the Setup menu.
2. Select the Record Discs menu item under Changer Management.
3. Select the Quick Record menu item.
4. FireBall will determine which changer discs have not been recorded
to the internal hard drive, and proceed with recording each disc (all
tracks) to the internal hard drive.
Recording a Range of CDs
Setting User Preferences