Filter
Top Products
Define the scheduled recording settings in the TIMER menu.
With activated timer, recording starts and stops automatically.
4.2 TIMER – scheduled recording
4.3 Event recording
If event-triggered recordings are programmed in the ALARM and/or MOTION menu, the
respective cameras are recorded at the “EVENT” recording rate (programming in CAMERA
menu).
ATTENTION:
For this recording mode, the DVR must be in recording standby mode (REC-LED ON).
The DVR can be switched to standby mode either manually (through REC key), via TIMER
configuration or through the REC-IN contact.
57
ATTENTION: HDD shutdown and removal is not admissable during recording and playback mode
and upon DVR system startup!
ATTENTION: Switching off the harddisk with the key switch will logoff the harddisk from the system.
Remove the harddisk only after the green power source LED at the harddisk tray is extinguished.