EverFocus EMV1200 DVR User Manual


 
4
Event Alarm
Fan failure, hard disk temperature, hard disk failure, hard disk full,
hard disk removed, power loss (after power is restored), network
loss, GPS loss, GPS speed, GPS fencing, G sensor limits
Email alert
Multiple email notifications in response to alarms and events.
(Requires real time network connectivity though cellular or WiFi
service)
G Sensor
Embedded 3-axis G Sensor; data recorded; alarm if separate user
limits for X/Y or Z axis exceeded
GPS Function
Optional External GPS Sensor for speed and geographic limit
alarms (rectangular or circular fencing)
Configuration Method
On screen menu with ‘portable monitor friendly’ graphical user
interface
Control/Setup IR remote control, USB mouse, network I/F
Real time clock
Can be synchronized to GPS/NTP time source; flexible DST
settings
Watchdog Function Reboots DVR automatically if required
Networking
RJ45 socket, 10/100Mbps; 802.11b/g WiFi, diversity antennas
TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP
System Warnings
System fail LED : HDD full, HDD/Sys Temp, Fan fail,
HDD fail LED : HDD power off, HDD failure
File Export USB 2.0 interface
Interfaces RS-232 x 2, RS-485, USB x 3, GPS port
Power Source
10V~36VDC (Built in surge protection, voltage regulation,
programmable Delay On/Off relative to ignition or other switched
voltage)
With 12ch x 300mA cameras
Camera Power Outputs
Total current 4.8 amps @ 12VDC (vibration resistant locking Molex
connectors – interface cable provided to coaxial power plugs: 3 X
groups of 4 cameras); 1.2A for camera 1~4 and 3.6A for camera
5~12
Dimensions (W x D x H)
210 x 260 x 70mm / 8.27" x 10.24" x 2.76"
313.5 x 260 x 97.8mm / 12.35" x 10.24" x 3.85"with mounting kit)
Weight
DVR without mount 3.2kg / 7.05 lbs.
DVR with mount 3.65kg / 8.05 lbs
Operating Temp.
Working Temperature: -40~55; -40F~131ºF
Storage Temperature: -40~85; -40F~185ºF