Filter
Top Products
58
4.5 Date/Time Setting
Figure 4-24 is a screenshot of the DATE/TIME SETTING MENU. This menu is for setting up the date/time
parameters for the DVR.
Figure 4-24 Date/Time Settings
4.5.1 Date/Time Settings
Time Zone: Set the time zone that the DVR adjusts to when updating from the time server.
Date: Set current Date.
Time: Set current Time.
Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format: Change time format between 12H and 24H mode.
Time Synchronization: Select “Off”, “NTP” or “GPS” for time synchronization.
If selecting “NTP”, you will be able to do the following NTP settings:
Update Interval: The frequency that the system automatically updates the time via the NTP server. Select
Daily, Weekly, or Monthly.
NTP Server: Displays the time server address that the DVR uses for time synchronization. Requires
operating network configuration and WAN or LAN access to a compatible NTP server.
To find a compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on “START” -> “RUN” -> type “command” and press “OK”.