Filter
Top Products
EDID 101D/EDID 101V • Installation and Operation
Installation and Operation, cont’d
6
Rack mounting procedures
The unit can be mounted in the front or rear of any of these rack
systems:
RSF 123 rack shelf kit for 3.5" deep products •
(part #60-190-20)
RSB 123 basic rack shelf kit for 3.5" deep products •
(part #60-604-20)
RSU 126 universal rack shelf kit for 6" deep products •
(part #60-190-10)
RSB 126 basic rack shelf kit for 6" deep products •
(part #60-604-10)
RSU 129 universal rack shelf kit for 9.5" deep products •
(part #60-190-01)
RSB 129 basic rack shelf kit for 9.5" deep products •
(part #60-604-01)
To rack mount the EDID 101D/EDID 101V:
1. If necessary, remove the rubber feet.
2. Secure the EDID 101 to the shelf with two 4-40 x 3/16"
screws in opposite corners of the base (see below).
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts.
EighthRackVersaToolsShelf
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
1/4 Rack Width Front
False Faceplate
Rack mounting the EDID 101