Filter
Top Products
EDID 101D/EDID 101V • Installation and Operation
9
Front and rear panels
e
Power connector — An optional external 12 VDC power
supply may be connected to this 2-pole, 3.5 mm captive screw
connector.
N
During normal operation the EDID 101 is powered
using +5 VDC from pin 9 of a DDC compliant VGA
source (EDID 101V) or pin 14 of a DVI source
(EDID 101D).
If the source is capable of providing power for the
EDID 101, the green Power LED (
a
) will light when
the source is connected and powered on.
When the EDID 101 is powered from a video source,
there is no need to connect an external power supply.
f
Input connector — EDID 101D – Female DVI-I.
EDID 101V – Female D-Sub 15 pin.
g
Output connector — EDID 101D – Female DVI-I.
EDID 101V – Female D-Sub 15 pin.
N
DVI-A to VGA adapters may be used to connect the
EDID 101D to analog displays and sources having VGA
connectors. EDID functionality, if the VGA source
supports it, will remain available.
N
The EDID 101 is a pass-through device and should be
located as close to the input source as possible.
The total length of DVI cabling, including input and
output cables, connected to the EDID 101D should not
exceed maximum recommended lengths for standard
DVI applications.