Filter
Top Products
Page- 17
Setup Menu
• Press SETUP button to enter the system settings main menu;
• Press cursor
/ buttons to move along icons on the top navigation bar on settings main menu.
Select one of the setup pages: General, Speaker, Downmix, Audio;
• Press cursor
/ buttons to choose a setting or return to the Setup Page;
• Press cursor
button to enter the highlighted setting;
• Press ENTER button on remote contro confirm your setting.
General settings
Speaker settings
Menu
entry
Function
Downmix
Here you can set the
format in which the DVD
sound should be played
back. STEREO = analog
stereo signal RIGHT /
LEFT = Dolby Pro Logic
stereo signal (2 channel
sound) SURROUND =
Virtual surround sound If
STEREO has been
switched on, “STR“ will
appear, for RIGHT /
LEFT, “LTRT“ will appear,
and for SURROUND,
“VSR“.
Menu
entry
Function
TV
Display
Here you can adjust the output
format for the DVD playback
according to your preferences.
Angle
Mark
This function is indicated in the
device menu but not supported by
the device.
OSD
language
This menu item allows you to set
the language of this menu.
Captions
This function displays subtitles as
long as those are available on the
data carrier and the function is
activated.
Screen
Saver
Chose ON or OFF about last
memory ,chose ON ,turn off the
sreen the memory will be
save,chose OFF turn on the unit
will be back to the default setting .