Filter
Top Products
ON-SCREEN MENU
Displaying the VCR Setup Menus
œ Turn on the power (TV and VCR).
œ Set the TV to channel 3 or 4.
œ Press the
VCR
button on the remote control to select
the VCR operation mode.
œ If the VCR indicator is off, press the
TV/VCR
button
on the remote control.
The VCR indicator lights.
1
Press the
MENU
button on the remote control.
The main MENU appears.
2
Press the ù (or û) button to select the VCR setup
option, then press the
OK
button.
The VCR setup menu appears.
CATV/TV@@@@@@@
z
CATV@TV
Cable@box@@@@@
z
No@@@Ch02
MTS@@@@@@@@@
z
ST@SAP@Mono
Audio@out@@@
z
ST@L@R@Mono
Child@Lock@@@@@On@@
z
Off
Off@timer@@@
z
Off@2Hr@6Hr
Auto@AV@Select@On@@
z
Off
[
ùû
]†Option
[<>]†Select@@@[MENU]†TV
3
Press the ù (or û) button to highlight the desired
option.
4
Press the > (or <) button once or more to move the
“z” indicator in front of your selection.
5
When finished, press the
MENU
button to save the
settings.
VCR Setup Menu Options
Reference pages are shown in square brackets.
CATV/TV [21]
œ Indicate whether you subscribe to cable TV or use
antenna.
Cable box [12, step
9
]
œ If you use a cable converter/decoder (cable box),
set the output channel.
MTS [29]
œ Select the MTS (Multichannel TV Sound) mode -
stereo, SAP or mono.
Audio out [30]
œ Select the audio output mode.
Child Lock [38]
œ Select this to block picture and sound.
Off timer
œ Select this to set the VCR to automatically shut off
after a specified period of non-operation.
Off: The power will not be turned off automatically.
2Hr: The power is turned off after 2 hours.
6Hr: The power is turned off after 6 hours.
NOTE:
The Off timer begins counting down after the
last VCR activity. Approximately 5 minutes before the
power is turned off, the “Your VCR will be off shortly”
message is displayed.
Auto AV Select
œ Turn on and off the A/V output on the rear panel
when the VCR power is off.
On: The input signal at the front A/V input jacks is
sent to the rear A/V output jacks.
Off: No output signal when the VCR power is off.
Before starting
BASIC OPERATION
SC4H/UF (FVH-T610 GB) Fri. Jan., 07/2000
18