Filter
Top Products
5
2. Precautions When Using this Product
Take the precautions and restrictions below when using the header board.
■ Precautions
• Operating the device outside the range of any general specification may cause the device to
malfunction. Use the device in the ranges of its general specifications.
• Please follow this manual about setting and using the adapter.
• Table 2.1 lists the temperature and humidity ranges for operating and storing the unit.
Table 2.1 Operation and Storage Conditions
■ Points to note when designing the printed circuit board for the user system
A height restriction applies to any components on the user system that are located close to where the
header board connects to the user system.
Take note of this when designing the printed circuit board for the user system.
Figure 2.1 Header Board Dimensions
Temperature Humidity
Operation 5 °C to 35 °C 20 % to 80 % (with no condensation)
Storage 0 °C to 70 °C 20 % to 80 % (with no condensation)
approx 17 mm.
Adapter
Insulating plate
User system
approx 13 mm.
Header
NAPACK176SD
150 mm
72 mm
1.6 mm
54 mm
115 mm
23 mm
* : The height differs slightly depending on how the YQPACK and the NQPACK are engaged.
10 mm