Fujitsu P50XHA58E Flat Panel Television User Manual


 
E-7
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-3.)
RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the output terminal of a PC, set-top box, game, etc.
Component video input terminal (VIDEO3 INPUT)
Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the Component video output terminal of DVD recorder/player or satellite receiver.
Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
Audio3 input terminal (AUDIO3 INPUT)
Audio2 input terminal (AUDIO2 INPUT)
Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
" External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-3.)
* See the speaker instruction manual for more information.
# Power input terminal
Connect this terminal to the power cord supplied with the plasma display.
When connecting the cord, attach a ferrite core to the cord. (See P. E-3.)
The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see Audio Input on P. E-32.
Video input Audio input
RGB1(mD-sub) Audio1
Video1(Video) Audio2
Video2(S-video) Audio2
Video3(Component Video) Audio3
Video4(Component Video) Audio3
Video5(HDMI) Audio4(HDMI)
Video6(HDMI) Audio5(HDMI)
Note
The illustration of external appearance is for 42” model. Please acknowledge some differences in the actual product of other models.
7459_E.book 7 ページ 2006年4月30日 日曜日 午前11時36分