Filter
Top Products
English
E-15
VCR
• Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)
• Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
To video output
To S-video output
To audio output
To video inputTo S-video inputTo audio input
03.1.16, 11:50Page 15
Downloaded From TV-Manual.com Manuals