Filter
Top Products
English
E-35
* On-screen information disappears if you do not take any action for about 60 seconds.
SETTING THE INPUT TERMINALS
• Video Input (when the P-TE1000E is installed)
Function
Select the video input format.
Each time is pressed, the setting is switched.
Select the desired input.
Press to store.
Video Format
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press to store.
Mask
Each time you press or , one of the available choices appears in the following sequence:
Off: Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.
Press to store.
03.1.16, 12:00Page 35
Downloaded From TV-Manual.com Manuals