Fujitsu P-TU5551E Flat Panel Television User Manual


 
E-23
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
Connect the audio signal cables to the digital output and the analog audio output terminals.
* The signal input as analog input is output as analog audio and digital audio.
* The signal input as digital input is output as digital audio. The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER
AV Selector rear panel
To digital audio input
To analog audio input
To digital audio outputTo analog audio output
Note
Unplug the power cord from the AC outlet before you connect external components.
Also refer to the instructions for the component to be connected.
When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
MHD01862_E.book 23 ページ 2005年11月25日 金曜日 午後8時54分