Fujitsu P-TU5551E Flat Panel Television User Manual


 
E-28
SELECTING INPUT MODE (Continued)
VIDEO INPUT MODE
1
Press to select the input mode.
You can select from VIDEO 1 mode to VIDEO 7
mode.
The video modes corresponding to each input
terminal are as follows.
VIDEO1: SCART
VIDEO2: SCART
VIDEO3: Video, S-video
VIDEO4: SCART
VIDEO5: Component video
VIDEO6: Component video
VIDEO7: HDMI
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-40.
* You can also change VIDEO mode by pressing
during “Video” indication on the
screen by pressing
.
RGB INPUT MODE
1
Press to select the input mode.
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as follows.
RGB1: mD-sub
RGB2: mD-sub
* You can also change RGB mode by pressing
during “RGB” indication on the screen by
pressing
.
* You can also use the buttons
on the display’s control
panel to perform these steps.
Video1 mode
* You can also use the buttons
on the display’s control
panel to perform these steps.
RGB1 mode
MHD01862_E.book 28 ページ 2005年11月25日 金曜日 午後8時54分