Filter
Top Products
E-4
INSTALLATION
To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated
location.
Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your
dealer performs the installation.
See the appropriate instruction manual for additional information on the mounting hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the plasma display securely into the position as described below.
Use the diagram below to determine how much space is needed to ensure proper heat radiation. This is a minimum space requirement;
therefore, provide at least as much space as indicated below.
* Make sure that the plasma display is installed in a location where the temperature can be maintained between 0°C and 40°C (between
32°F and 104°F).
* Never attempt to tilt the plasma display sideways or backward.
* To prevent the power cord and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* To prevent accidents and ensure safety in the event of an earthquake, secure the plasma display to prevent it from tipping over.
Display Section
AV Selector section
Front Side
Front Side
Upper
Right
10
10
10
5
Lower
Left
Wall
3.5 (for 42” / 50”)
5 (for 55”)
Upper
Right
Floor
Left
(
cm
)
Floor
Rear
Upper
(
cm
)
Note
• See P. E-45 for details on the options.
• The external view is meant to be a representation of the actual unit and is not to scale; therefore, it may differ from the actual shape and size of the
product.
• Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials
provided.
(cm)
(cm)
MHD01862_E.book 4 ページ ２００５年１１月２５日 金曜日 午後８時５４分