Filter
Top Products
For DVD-Videos
1 Press [DISPLAY] during playback to show cur-
rent Chapter.
• The elapsed and remaining
playing time of the current
chapter will be displayed.
2 Press [DISPLAY] again to show current Title.
• The elapsed and remaining
playing time of the current title
will be displayed.
3 Press [DISPLAY] again.
• The bit rate and the current
repeat setting will be displayed.
• If you are playing a dual layered disc, the layer
number will also be displayed.
(L0: Layer 0 is playing. L1: Layer 1 is playing.)
4 Press [DISPLAY] again to exit.
20
EN
You can determine the playing order of tracks.
1 In the stop mode, press [MODE].
• The PROGRAM screen appears.
2 Use [
KK
/
LL
] to select a track,
then press
[ENTER].
NOTES:
•Up to 99 tracks can be entered.
•Press
[CLEAR] to erase the
most recently entered track.
•If you enter more than 8 tracks, you can change
pages of the program list with
[PREV H ]
[NEXT G].
•To erase all tracks in the program at once, select "ALL
CLEAR" at the bottom of the track list.
3 Repeat step 2 until you select all the tracks you
want to play in the program.
4 Press [PLAY
BB
] to play the programmed tracks.
This function shuffles the playing order of
tracks.
1 In the stop mode, press
[MODE] twice.
• The RANDOM screen appears.
2 Press [PLAY
BB
] to start random playback.
NOTE:
•REPEAT setting is available during random playback.
(Refer to "REPEAT TRACK" on page 19.)
3 Press [STOP
CC
] to stop random playback.
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
PROGRAMMED PLAYBACK
RANDOM PLAYBACK
You can check the information about the current disc by pressing [DISPLAY].
9/49 0:00:00 -0:03:30
1/3 0:00:00 - 1:23:45
TL1
For Audio CDs
1 Press [DISPLAY] during playback to show the
current Track.
• The elapsed and remaining
playing time of the current
track will be displayed.
2 Press [DISPLAY] again to show current Total
Tra ck.
• The elapsed and remaining
playing time of the total track
will be displayed.
3 Press [DISPLAY] again to exit.
4/12 0:03:21 - 0:02:15
T
4/12 0:13:45 - 0:45:40
T
PROGRAM B
When in the
PROGRAM mode.
PROGRAM
TOTAL 0:14:25
1/1
1/4
6 1:30
CD-DA
ENTER
CLEAR
PLAY
2 4:30
1 3:40 1 3:40
3 5:00
4 3:10
5 5:10
6 1:30
3 5:00
10 1:30
12 2:45
6 1:30
7 2:30
PROGRAM
TOTAL 0:00:00
1/1
1/4
1 3:40
CD-DA
ENTER
CLEAR
PLAY
2 4:30
1 3:40
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
5 Press [STOP
CC
] to temporarily stop the playback.
You can resume the playback by pressing
[PLAY
BB
].
Press
[STOP
CC
] twice to cancel the programmed
playback.
NOTE:
•REPEAT setting is available during programmed
playback. (Refer to "REPEAT TRACK" on page 19.)
O
N-SCREEN INFORMATION