Filter
Top Products
31
Recording Playing discs EditingBefore you start Connections Getting started
Changing the
Setup menu
VCR functions Others Español
EN
Checking, canceling, or correcting the timer programming
information
Recording
1
Press [TIMER SET].
TIMER REC indicator will light off
on the front panel.
2
Press [TIMER].
Timer Programming list will appear.
3
Check the information on the
list you will need.
4
To clear the timer programming:
Using [K / L], select your
desired program.
Press [CLEAR].
To correct the timer program-
ming:
Using [K / L], select your
desired program. Press [OK].
Next, correct the timer
programming by using
[K / L / { / B].
Finally, press [OK] again.
5
Press [TIMER] to exit.
6
Press [TIMER SET] to return to
the timer standby mode.
Press [CLEAR] to erase the
selected program.
Each error number means:
To stop the Timer Recording in process
If the timer program did not complete correctly, the error number
appears in the Timer Programming list.
• A program with the error number is grayed and asterisked in the Timer Programming list.
• Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be cleared.
Timer Recording (cont’d)
E1-22
E37-39
Recording error other than
below
E41 Power failed
E42 No disc when recording
E24 Unrecordable disc E43 Already 49 titles recorded
E25-26 Copy prohibited program E44 Already 254 chapters
recorded
E29 Disc protected E45 Copy prohibited program
E30 Disc full
E46 It is impossible to record
additionally on a disc
recorded by other units
when setting Replace Disc
Menu to OFF.
E35 PCA full
E36 Already finalized Video
format disc
E40 Some portion has not
been recorded because
of program overlapping.
Recording did not start at the
start time.
Note
• Press [TIMER] to check the Timer Recording in process.
- When the Timer Recording is in progress, that program will be highlighted in red.
- While using the side of the unit that is free from Timer Recording (either DVD or VCR) during timer standby
mode, no programs will be highlighted even if you press [TIMER] to confirm the program information. In this
case, you cannot select other program either for correction or add any new programs.
• The unit will be turned on automatically before the recording time.
Timer Programming
2. ---
3. ---
1. JAN/01 12:57AM 1:57AM 8 DVD HQ
Date Start End CH Mode
DVD
VCR
VCR DVD
Press [STOP C] to stop the disc recording or [STOP C / EJECT A]
to stop the videotape recording on the front panel of the main unit.
[STOP C] on the remote control is not effective.
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
JAN/01 12:57AM 1:57AM 8 DVD E22
Date Start End CH Mode
DVD
VCR
VCR DVD
*
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
STOP
STANDBY-ON
TIMER SET
TIMER
PREV NEXT
OPEN/CLOSE
SPACE
123
456
78
0
9
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC
DISPLAY
TUV WXYZ
DVD
REC
REC MODE
SEARCH
VCR
SETUP
CM SKIP
RETURN
DISC MENU
TITLE
RAPID PLAY
CLEAR
OK
PLAY
4
1
6
2
5