Gateway AR-230 DVD Recorder User Manual


 
50
Chapter 4: Troubleshooting
www.gateway.com
Disc
The disc does not play.
Make sure that there is a disc in the tray.
If you are using the remote control, make sure that the batteries are inserted
correctly. If the batteries are inserted correctly, they may not have a charge.
Replace the batteries.
If the disc has two playable sides, make sure that the side you want to play
is facing down in the tray.
The disc may be warped and unplayable.
The region code on the DVD may not be Region 1 (North America).
Moisture may have condensed inside the recorder. Remove the DVD and
leave the recorder turned on for about half an hour to eliminate the
condensation.
Power
The recorder does not have power.
Make sure that the AC power cord is plugged securely into the wall outlet.
Make sure that the Power button on the front of the recorder is pressed in.
Remote control
The remote control does not work.
Point the remote control directly at the sensor on the front of the recorder.
Remove any obstacles between the remote control and the recorder.
Move closer to the recorder when using the remote control.
Make sure that the batteries are inserted correctly.
Replace the batteries.