Gateway CG3100 Cable Box User Manual


 
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
Wireless Configuration 2-9
v1.0, July 2009
3. Select one of the WPA settings:
Figure 2-3
WP
A-PSK. This setting provides the TKIP encryption type and a pre-shared key
passphrase.
WP
A2-PSK. This setting provides the AES encryption type and a pre-shared key
passphrase.
4. Depending on the WP
A settings that you select, enter the required information:
For WPA-PSK or WPA2-PSK, enter the pre-shared ke
y, which is a passphrase between 8 and
63 characters.
5. Click Ap
ply to save your settings.
Using Push 'N' Connect (WPS) to Configure Your Wireless
Network and Security
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure
the gateway’s SSID and security settings and, at the same time, connect the wireless client securely
and easily to the gateway. Look for the
symbol on your client device (computers that will
connect wirelessly to the gateway are clients). WPS
uses the network name (SSID) that is