Filter
Top Products
Things
to
Know
Before
Connecting
Components
Protect
Your Components
from Power Surges
Connect
all components before
plugging
any
power
cords
into the wall outlet.
Always turn off the
TV and
other components
before
you
connect
or disconnect any cables.
Position
Cables
Correctly to Avoid Audio Hum
or
Interference
.
Insert all cable
plugs
firmly
into their
jacks.
.
Place the audio/video cables to the sides of the
TV's
back
panel
instead of straight down the
middle after
you
connect
your
components.
.
Try not to coil any twin-lead cables and
keep
them away
from
the audio/video cables as
much as
possible.
.
Make sure all antennas and cables are
properly
grounded.
Refer
to the Safety
Tips sheet
packed
with
your
unit.
Protect
Your
Components
from Overheating
.
Do not block ventilation holes in any
of
the
components.
Arrange
the components
so that
air
can circulate
freely.
Do
not
stack components.
Allow
adequate
ventilation when
placing your
components
in a stand.
Place
an amplifier or satellite
receiver on the
top
shelf of the stand so
heated
air
rising from
it will not flow around other components.
7
coNNECTIoNS
V
V
V
V
V
V
V
47