Filter
Top Products
REFERENCE
52
After you program the remote to
control your VCR, record your VCR
code here for easy reference.
After you program the remote to
control a fourth device, record your
ALT code here for easy reference.
This remote may not operate all
models of the brands that are
shown. Use the codes shown in this
manual, or on the sheet packed with
your remote.
This remote may not operate all
models of the brands that are
shown. Use the codes shown in this
manual, or on the sheet packed with
your remote.
Programming the Remote
to Control Your VCR
To determine whether your remote needs to be programmed,
turn the VCR on, point the remote at the VCR, and press the VCR
button. Then press ON•OFF or CHAN UP or DOWN to see if the
VCR responds to the remote commands.
Follow these steps to program your remote to control your VCR:
1. Turn on the VCR.
2. Look up your VCR brand and its code number on the code
list on page 55.
3. Press and hold the VCR button.
4. Enter the three-digit code from the code list.
5. Release the device button and press ON•OFF or CHAN UP/
DOWN to see if the VCR responds to the remote commands.
6. Repeat these steps using the next code listed for your brand
until the VCR responds to the remote commands.
Programming the Remote
to Control Other Devices
The ALT button is a fourth device button that can be
programmed to control a second VCR, a cable box, or
a laserdisc player.
Programming the Remote to Control a Second VCR
1. Turn on the VCR to be programmed.
2. Look up your brand and its code number on code list on
page 55.
3. Press and hold the ALT button.
4. Press and release the VCR button.
5. Enter the three-digit code from the code list.
6. Release the ALT button and press ON•OFF or CHAN UP/
DOWN to see if the VCR responds to the remote commands.
7. Repeat these steps using the next code listed for your brand
until the VCR responds to the remote commands.