Filter
Top Products
8
EXT-HDMI1.3-1FO
SC-SC FIBER OPTIC CABLE
(Up to 1,000 ft)
Sender
HDMI Source
Receiver
HD Display
HDMI CABLE
How to Connect the Extender for HDMI 1.3 over One Fiber with IR
1. Connect a Hi-Def source to the Sender Unit using the included Locking HDMI
cable. Connect the HDTV display to the Receiver Unit with a user-supplied
HDMI cable.
2. Connect an SC-terminated fi ber optic cable to the Sender Unit. Connect the
opposite end of the fi ber cable to the Receiver Unit.
3. OPTIONAL: Connect an RS-232 cable from the RS-232 serial port on the
controlling device to the RS-232 port on the Sender Unit. Connect another
RS-232 serial cable from the RS-232 port on the Receiver Unit to the RS-
232 port of the RS-232 device.
4. IMPORTANT: Before connecting the power supplies to the Sender Unit and
the Receiver Unit, see page 11 for information on calibrating the Sender Unit
and Receiver Unit.
After the Sender Unit and Receiver Unit have been properly calibrated, a vibrant
HDTV HD picture will be seen, along with multichannel digital audio (if the display
supports audio).
Wiring Diagram for the Extender for HDMI 1.3 over One Fiber with IR
CONNECTING AND OPERATING THE
GEFEN EXTENDER FOR HDMI 1.3 OVER ONE FIBER WITH IR