Filter
Top Products
DIP SWITCH CONFIGURATION
9
DIP Switches
On the bottom of the Sender Unit and Receiver Unit are a bank of four (4) DIP
switches. These DIP switches provide control over EDID, Deep Color, and unit
Calibration.
Remove the strip of tape to expose the DIP switches. To change the DIP switch
settings, move the appropriate DIP switch to its ON or OFF position using a small
pointed object. The DIP switches and their functions are shown below.
Sender Unit DIP switches
DIP Switch Function
1 EDID Mode: Local (OFF) or External (ON)
2 Deep Color Mode: 12-bit (OFF) or 8-bit (ON)
3 Calibration Mode: On (OFF) or Lock (ON)
4 NOT USED
Receiver Unit DIP switches
DIP Switch Function
1 NOT USED
2 NOT USED
3 Calibration Mode: On (OFF) or Lock (ON)
4 NOT USED