Filter
Top Products
24
Initial Setup (Continued)
Country Code
Enter the 2-letter code for the country/area whose stan-
dards were used to rate your DVDs, referring to the
“Country Code List” on page 56.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the LOCK option.
33
While the LOCK option is selected, press B to
move to the second level.
44
Use v / V to select the Country Code option.
55
Press B to move to the third level.
66
When you have not entered a password yet.
Enter a 4-digit password using the 0-9 buttons.
Enter the 4-digit password again to confirm.
When you have already entered a password;
Enter your 4-digit password using the 0-9 buttons.
ip
If you a mistake before pressing ENTER, press b to
back up and then re-enter your password.
77
Select the first character using the v / V
buttons.
88
Shift the cursor using the B button and select
the second character using the v / V buttons.
99
Press ENTER to confirm your Country Code
selection, then press SETUP to exit the menu.
RECORD Settings
Disc Record Mode
You can set the default DVD recording quality to: XP (1
hr/disc), SP (2 hrs/disc), LP (4 hrs/disc), or EP (6
hrs/disc)
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the RECORD option.
33
While the RECORD option is selected, press B
to move to the second level.
44
Use v / V to select the Disc Record Mode
option.
55
Press B to move to the third level.
66
Use v / V to select the desired Disc Record
Mode (XP, SP, LP, or EP).
77
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
VCR Record Mode
You can set the default VCR recording quality to SP
(Standard Play) or SLP (Super Long Play). SP is higher
quality, but SLP provides 3 times the recording time;
e.g., a 2 hour tape will record for 6 hours in SLP mode.
Movie Rating
Set Password
Country Code
US
Prev. Select Close
XP
SP
LP
EP
Disc Record Mode
VCR Record Mode
Auto Chapter
Prev. Select Close
SLP
SP
Disc Record Mode
VCR Record Mode
Auto Chapter
Prev. Select Close