Filter
Top Products
OPERATION
27
VCR Operation (Continued)
1100
Use
VV
to choose the SPEED option.
Use
bb
/
BB
to choose the desired recording
speed (AUTO, SP or EP).
AUTO mode determines how much tape is left and
switches the recording speed from SP to EP, if nec-
essary, to complete recording the program. There
will be some picture and sound distortion at the point
of the speed change.
1111
Use
VV
to choose the REPEAT option.
Use
bb
/
BB
to choose the desired repeat setting
(ONCE, WEEKLY, or DAILY).
ONCE: For recording a single event.
WEEKLY: For recording an event once a week on a
certain day.
DAILY: For recording an event at the same time
Monday through Friday.
Tip
If the input data is wrong, use
vv
to select the data
and correct it using
bb
/
BB
.
1122
Press MENU to store the program in memory.
If the program start time is past, the EVENT
SCHEDULED IN THE PAST message will appear on
the TV screen. Return to the incorrect program and
program it with the correct time.
If you enter a past date, the timer recording will be
performed on that date the following year.
Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV convert-
er box, you can program multiple recordings only on
the converter box output channel. This is because the
converter determines what channel you view through
your DVD+VCR.
1133
Turn the DVD+VCR off for timer recording to
take place.
Tip
If you are finished programming and you want to set the
DVD+VCR to record the programs you have entered:
A) MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. B) YOU MUST TURN OFF THE DVD+VCR
BEFORE IT WILL RECORD ANY TIMER PROGRAMS. (the
TIMER indicator will light). The DVD+VCR is now set to
record the preset programs.
ote
If the power fails or the DVD+VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in
memory for approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when power is
restored. Reset the clock according to the instructions on page
21.
Checking (Erasing) the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1 Press MENU to display the MAIN menu.
2 Use v/V to choose the TIMER RECORD menu.
Press SELECT/ENTER and the TIMER RECORD
menu will appear.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press MENU to return to the TV screen.
Program Priority
If the recording start and end
times of preset programs
overlap on the same day
(see the example and dia-
gram left), program number 2
will not be recorded until pro-
gram number 1 is finished.
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.
PROGRAM 1
MONTH : JULY
DAY : 6 SAT
START : 6 : 00 PM
STOP : 7 : 30 PM
CHANNEL : 4 TV
SPEED : SP
REPEAT : ONCE
SELECT
TO EXIT PRESS
ADJUST
SELECT
TO EXIT PRESS
ENTER
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
PROGRAM 1
MONTH : JULY
DAY : 6 SAT
START : 6 : 00 PM
STOP : 7 : 30 PM
CHANNEL : 4 TV
SPEED : SP
REPEAT : ONCE
TO EXIT PRESS
TO ERASE PRESS