Filter
Top Products
30
VCR Operation (Continued)
Tape Counter Memory Feature
Real-Time Counter
Press CLK/CTR to select the real-time counter display,
which shows the length of the tape in hours, minutes,
and seconds.
Every press of CLK/CTR changes the TV screen as
illustrated below.
The counter changes to “M 0:00:00” when the cassette is
ejected.
The real-time counter does not operate if nothing is record-
ed on the tape.
The real-time counter will not work unless a tape is
inserted.
Counter Memory Function
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
11
Begin recording or playing a tape.
22
Press CLK/CTR repeatedly to display the real-
time counter on the TV screen.
33
At the point that you want to locate later, reset
the real-time counter to “M 0:00:00” by pressing
CLEAR.
44
Continue to play or record.
55
Press STOP (
xx
) when recording or playback fin-
ishes.
66
Press PREV (
mm
).
The tape automatically stops when the tape counter
returns to about “M 0:00:00”.
Tape Remaining
This function displays the time remaining on the tape
during recording or playback.
Press CLK/CTR until the REM indicator displays on the
TV screen during recording or playback.
ote
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, T-210, etc.).
Additional VCR Information
During manual recording, Timer recording, One-Touch
Recording, playback, or fast forward modes, the DVD+VCR
automatically starts rewinding the tape at the end of the
tape. The cassette will stop at the beginning of the tape and
be ejected, and the DVD+VCR will turn itself off.
After you have finished using the DVD+VCR, rewind, eject,
and remove the cassette. Place the cassette in its protec-
tive sleeve to protect it from dust. It is not necessary to
rewind the cassette before removing it, but if you do, it will
be ready to play or record the next time you use it.
Be sure the DVD+VCR Channel Selector is on the correct
channel you wish to record. The channel that is being
recorded can always be checked by setting the television
on the DVD+VCR channel (3 or 4) and pressing the
TV/VCR selector to turn the DVD+VCR’s VCR indicator on.
Do not attempt to hook up more than one television set to
the DVD+VCR for either recording or playback.
Auto Play System
The DVD+VCR features automatic playback when you
load a cassette with the record safety tab removed
(such as with most pre-recorded or rented movies).
The power turns on automatically and playback begins.
At the end of the tape, the DVD+VCR stops, then rewinds.
The cassette is ejected after rewinding and the unit turns
itself off automatically.
2:15 AM M 0:05:25 REM 1:07
CLOCK COUNTER REMAINING TIME
LOAD
TAPE
AUTO
REWIND
AUTO
POWER
OFF
AUTO
EJECT
AUTO
PLAY