Filter
Top Products
ENGLISH
46
OPERATION USING EXTERNAL DEVICES
-----------------------------
... with an analogue TV signal
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
7
Video signal: CVBS.
7
Audio signal: stereo, analogue.
7
»AV2« preset.
1 Connect the »Y/AV2« socket on the
television to the corresponding socket of the
external device with an RCA cable (video
signal).
2 Connect the »L R« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
Note:
7
There must not be a video signal at the »Y/
AV2« and »AV1/S-VHS« socket at the
same time. This could lead to picture distur-
bances.
Using a DVD player,
DVD recorder, video recorder
or set-top box
1 Switch on the external device and select the
function you wish to use.
2
Press »
AV
«, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset for the input signal (»AV1«,
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,
»HDMI3«, »HDMI4« or »Component«)
and press »●« to confirm.
Headphones
Connecting the headphones
1 Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the left
side of the television.
Changing the headphone volume
1 Open the menu with »i«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press »●« to confirm.
– The »SOUND SETTINGS« menu appears.
3 Select the menu item »Audio Output Setup«
with »
V
« or »
Λ
« and press »●« to confirm.
– The »Audio Output Setup« menu appears.
4 Select the line »Headphone« with »
V
« or
»
Λ
«.
5 Set the preferred volume with »
<
« and »
>
«.
6 Press »i« to end the setting.
Note:
7
Prolonged listening with headphones at loud
volumes can damage your hearing.