Filter
Top Products
65
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
Note:
7
Analogue channels can be selected if the
option »Air« or »Cable« has been selected.
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« with »
V
«
or »
Λ
« and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
V
« or
»
Λ
« and press »OK« to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
V
«,
»
Λ
«, »
<
« or »
>
« and press »
« (red) to con-
firm.
2 Press »
« (yellow) to confirm the deletion
process.
Note:
7
»
« (blue) allows all television channels
to be deleted.
3 Press »
« (green) to confirm the deletion
process.
7
If fine tuning is necessary, select the line
»Fine Tuning« with »
V
« or »
Λ
« and use »
<
«
or »
>
« to make the setting.
7 Press »
« (blue) to save the setting.
Note:
7
If you wish to remedy other television
channels, repeat steps 4 to 8.
8 Press »MENU« to end the setting.