Filter
Top Products
Return to Selected Button Program (SWAP)
If you would like to return to the program
you watch by pressing a single button
while in any program, press the button
(
). When you press the button ( )
while in any program or AV, it directly
switches to the program you selected. If you
press the same button again, it switches to the
program you last viewed. If you press the button
(
) while the PIP window is open, the main
screen and the PIP screen swap places.
TV controls:
Temporary On-Off (STAND-BY)
When you press the red (
) stand-by
button (Temporary power on-off function)
located on the upper right hand side of
your remote control of your television
when it is switched on; the sound and
the picture will go off. In the stand-by
function, the power indicator of your
television will glow more. To switch your
television back on, either press the same button,
any of the digital buttons or the (
)/( )
buttons.
Caution!
If you are not going to use your television for a
long period of time, make sure to switch it off
from the main power button.
Program selection
You may enter whichever program
number you would like by pressing the
buttons (
)/( ) located on your
television and your remote control. To
select the programs that are over 9, you
can use the Numerical buttons. You may
enter the number of the program you
would like to select using the numerical
buttons. For example, to switch to the
program number 12, press relatively the
buttons number 1 and 2 found on your
remote control.
PR 01
PR 11
PR 01
Performing the initial power-on settings
PR-
PR+
PR-
PR+
PROGRAM TABLE
P 10
P 11
P 12
P 13
P 14
P 05 TRT1
P 06 SHOW
P 07
P 08
P 09
P 00
P 01
P02 TRT1
P03 TRT1
P04 TRT1
BACK
MENU
DELETE
NAME
SELECT
MOVE
SKIP
OK
Temporary sound mute (MUTE)
To temporarily mute the sound of your
television, press the (
) button. In that
case, the sign (
) will appear on the
screen. When you press the same button
for the second time, the sound will be
on again. If you press the button (
) while in
the Mute mode, the sound level is increased
and the Mute position is aborted.
Main Menu
Press the ( ) button. The Menu including
all the setting menus will be visualized
on the screen. Navigating through the
Menu titles with the up / down movement direction
buttons (
)/( ) and pressing the up / down
direction button (
)/( ), you may select the
menu you would like.
In the event that you wish to exit the application
at any given stage, simply press the (
) button.
Tuning and storing the programs on
your television
You can either tune the programs
automatically or manually storing them in
your television.
Note:
If your television does not receive any
broadcast for a period of 5 minutes, it
automatically switches to the stand-by
position.
ODS is displayed on the screen.
-9-