Filter
Top Products
18
GETTING STARTED
_______________________________
Selecting the video output socket
(EURO AV/RGB or S-Video)
The video output of your DVD player has been set at the factory to
»RGB«.
When you connect your DVD-Player to the television, flat screen or
projector using a Y/C cable (»S-VIDEO OUT« socket on the DVD
player) or using a cinch cable (»Y«, »Pb/Cb« and »Pr/Cr«
sockets on the DVD player), you will need to set the video output for
the video signal and the image to be relayed to the television.
Notes:
If you cannot see the settings menu, connect the »VIDEO
OUT« socket on the DVD player to the corresponding socket
(VIDEO IN) on the television using a cinch cable.
1 Call up the main menu with »i«.
2 Select the »Picture« menu item with »
a
« or »
s
« and activate
with »OK«.
3 Select »Video output« with »
S
« or »
A
« and activate with
»OK«.
4 Select the desired video output with »
S
« or »
A
« and con-
firm with »OK«.
– »S-Video« for the »S-VIDEO OUT« socket;
»YUV« for the »EURO AV
➞
TV« socket;
»RGB« for the »EURO AV
➞
TV« socket;
»YPbPr« for the »Y«, »Pb/Cb« and »Pr/Cr« sockets.
5 Press »i« to conclude the setting.
Notes:
If the television has been connected to the »S-VIDEO OUT«
socket, no picture will appear. Keep pressing
»x«
until the
picture appears.
The video output is set to »S-Video«.
Installation Picture Sound Child Lock
TV Format
TV Standard
HDMI Resolution
Video Output
4:3 LB
PA L
576p
RGB
HD JPEG Mode HD JPEG
S-Video
YUV
JPEG Interval 5 Seconds
RGB
YPbPr
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 18