Filter
Top Products
ENGLISH
11
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual B «) and the
dubbed version on sound channel A (display: »Dual A«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1 Select »Sound type« with »P+« or »P-« and adjust the setting
with »
Ǹ
« or »
Ƿ
«.
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1 Select »Sound type« with »P+« or »P-«.
2 Press »
Ǹ
« or »
Ƿ
« to select the setting.
Automatic volume
The television channels broadcast at different volumes. The automa-
tic volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1 Select »AVL« with »P+« or »P-« and then select »On« with
»
Ǹ
« or »
Ƿ
«.
Equaliser
The equaliser offers you four preset sound settings (Music, Sport,
Cinema and Dialogue) and one which you can create yourself
(User).
1 Select »Equalizer« with »P+« or »P-« and confirm with
»OK«.
– The »Equalizer« menu appears.
2 Select the audio setting »User« with »P+« or »P-« and confirm
with »OK«.
– The frequency band »120 Hz« is activated.
3 Set the desired value with »P+« or »P-« and select the next
frequency band with »
Ǹ
« or »
Ƿ
«.
4 Press »
F
« (blue) to save the setting.
5 Press »
F
« (blue) to finish the settings.
Concluding the settings
1 Press »i« to finish the settings.
SETTINGS
______________________________________________
Equalizer
Select Back
and edit Exit
●
OK
User
ĵŁ
12 dB
0 dB
-12 dB
<120Hz 500Hz 1.5kHz 5kHz 10kHz>