Filter
Top Products
24
Connecting a PC
1 Connect the socket »PC IN« or »DVI-D« on the television to
the corresponding socket on the PC using a VGA cable.
2 Connect the socket »PC-DVI AUDIO IN« on the television to
the corresponding socket on the PC using a cinch cable (audio
signal).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« or »DVI« channel with »P+« or
»P-« and press »OK« to confirm.
Settings for the PC
1 Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2 Select »Picture« with »P+« or »P-« and press »OK« to
confirm.
– The »Picture« menu appears.
3 Select »Brightness« with »P+« or »P-« and press »P+« again.
– The second page of the picture menu appears.
4 Press »P+« or »P-« to select the function or setting.
– Options:
»H Position« – adjust the horizontal picture position
»V Position« – adjust the vertical picture position
»Phase« – removes horizontal flicker, blurring and horizontal
lines
»Auto position« – for automatic adjustment to the PC
5 Press »OK« to activate the function and »
Ǹ
« or »
Ƿ
« to adjust.
6 Press »
i« to finish the setting.
PC MONITOR MODE
__________________________
AV 3
AV 2
AV 1
PC-IN DVI-D
PC-DVI
AUDIO IN
S-VHS
AV OUT
LRVIDEO
AV- 4
LRVIDEO
ANT IN
AC IN
Picture
Select Back
and open Exit
●
OK
H Position
V Position
Phase
Auto position
Zoom
Noise reduction Sharp
RichPicture smart
Picture
Select Back
and edit Exit
●
OK
Brightness 39
Contrast
Colour
Sharpness
Hue
Noise reduction Sharp
UserPicture smart