Grundig PC CONTROL Universal Remote User Manual


 
3PC CONTROL
General Security Note
Technical manipulation of the product or any changes to the product are forbidden,
because of security and approval issues.
Please take care to set up the device correctly - consult your user guide. Children should
use the device only under adult supervision.
Avoid the following
strong mechanical wear and tear
high temperature
strong vibrations
high humidity
Please also respect the additional security notes in the various user guide chapters. For
questions not covered from the user guide please contact our technical hotline or another
specialist.
To ensure correct set up please read the manual and security notes carefully.
Battery change
The device may only be used with 4 AAA alkaline batteries - never try to connect to
another power supply. When inserting batteries be sure the right polarity is used. Remove
the batteries when the device is not used for a longer period. Make sure that the
batteries are not short circuited and are not disposed in fire (danger of explosion).
Batteries do not belong in children hands. Don’t let batteries lay around openly - they
might be swallowed by children or animals. If this happens see a doctor immediately.
Leaking or damaged batteries can upon contact with skin cause burning or acid damage -
if necessary use suitable gloves.
Please dispose of batteries in accordance with local bylaws.
PC Control Remote
Contents
1. Introduction 4
2. Put in the batteries 4
3. PC operation 4
3.1. Software and CM21A installation. 4
3.2. Operation 5
3.3. Function of the remote's buttons in PC mode 6
3.4. Minimum PC Requirements 8
4. A/V functionality 8
4.1. Function of the remote’s buttons in TV. VCR, DVD, SAT and
Home Automation mode 8
4.2. Programming the TV, VCR , DVD, SAT and AUX modes 10
4.3. Manual code search 10
4.4. Automatic code search 11
4.5 Brand search 11
4.6. Identifying codes found 11
ENGLISH