Filter
Top Products
55
1. From the Home screen menu, navigate to Sengs > Parental controls, and then enter your PIN.
2. In the Parental controls screen, highlight Reset parental controls.
3. Follow the instrucons on the screen to conrm that you want to erase all parental control sengs.
Tip
: Reseng parental controls also erases your parental control PIN.
More settings
This secon describes the features and sengs of the Roku TV that were not covered in the other parts of this guide.
Changing network settings
If needed, you can change your network sengs at any me. For example, if you change the name of your wireless
network (its SSID) or its password, you will need to change your TV’s sengs so that it can connue to connect. Also, if
you decided not to connect to the Internet in “Guided Setup” on page 18 , you can use Network sengs to connect
at a later me.
To change network sengs, from the Home screen menu, navigate to Sengs > Network, and then press . At this
point, you can choose the following opons:
• Update connecon – Press OK to start the update process. The TV uses your current wireless network
name and password to reconrm the Wi-Fi connecon, the local network connecon, and the Internet
connecon.
• Set up new Wi-Fi connecon – Press OK to start a scan for wireless networks. The TV scans for the wireless
networks within range and displays the rst few it nds in order, with the strongest signals rst. In addion
to your own wireless signal, the TV might pick up signals from your neighbors. Now you can do one of the
following:
o
Select your network name – Select the name of your network and then enter your wireless
password if requested.
o
Scan again – If you don’t see your wireless network name in the list, select Scan again to list all
networks in range. The rst scan listed only the rst few, strongest wireless signals. The second
scan somemes results in a longer list. If you sll don’t see your network name, you might need
to adjust the locaon of the wireless router or the TV, turn on your router, or make other changes.
When everything is ready, select Scan again to repeat the network scan.
Note:
Highlighng
Scan Again
displays an informaonal panel with the unique media access control
(MAC) address of your Roku TV. You will need the MAC address if your wireless router is congured
to use MAC address ltering.
o Private network – If your wireless network name is hidden, it won’t appear in the list. Select
Private network to display an on-screen keyboard, and use it to enter your network name. Unless
you changed the factory-set network name, you can nd the name (also called SSID) on a label the
router.
Tip
: Wireless networks that are password-protected display a “padlock” icon adjacent to the name.