Haier 43E4500R Flat Panel Television User Manual


 
60
A CEC-compable amplier is powered on and CEC discoverability is enabled.
The CEC-compable amplier’s HDMI® ARC connector is connected to the TV’s HDMI ARC connector with a
suitable HDMI® cable.
When the CEC-compable amplier is o, the TV automacally turns on its speakers (unless you have turned them o
as described in “
Turning o Haier • Roku TV speakers
” on page 58 ) and resumes local control of volume and mute
state.
System audio control is disabled by default. To enable system audio control, in the Home screen menu, navigate to
Sengs > System > Control other devices (CEC) and highlight System audio control. Press OK to check the adjacent
check box.
Enabling 1-touch play
1- touch play enables a component to control which TV input is acve. For example, pressing Play on your Blu-ray
player switches the TV to the Blu-ray input.
1- touch play is disabled by default. To enable 1-touch play, in the Home screen menu, navigate to Sengs > System >
Control other devices (CEC) and highlight 1-touch play. Press OK to check the adjacent check box.
Enabling system standby
The system standby feature causes other components to power o when you power o your TV. Depending on the
CEC System Standby implementaon, it also might enable connected components to power o your TV when you
power o the component.
System standby is disabled by default. To enable system standby, in the Home screen menu, navigate to Sengs >
System > Control other devices (CEC) and highlight System standby. Press OK to check the adjacent check box.
Restarting the Haier • Roku TV
You can restart the TV when necessary. Restarng has the same eect as unplugging the TV power and then plugging
it in again.
To restart the TV, navigate to Sengs > System > Power and then move right to System restart and then Restart. Press
OK to conrm restart.
While the TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a few more
seconds. When the restart operaon is complete, you’ll see the familiar Home screen.
Resetting the Haier • Roku TV
You can choose to reset only the TV picture and audio sengs to their original values, or perform a full factory reset to
return the TV to the state it was in when you rst unpacked and turned it on.