Filter
Top Products
Operation
Haier LED HDTV EN-12
Audio
Balance
Bass
Treble
Sound Surround On
Equalizer Off
Speaker Off
AVL Off
Audio Only
0
50
50
Video
Audio
Channel
Lock
Function
Select
BackAdjust
(;,7
ENTER
SPDIF Type Off
CH+/-
VOL+/-
Press B VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
Press
C VOL+/ ENTER button to conrm and CH+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired audio quality
D
has been achieved.
Function
Balance:Y Press
CH+/- button and VOL+/ENTER to
conrm, then press VOL+/- to adjust the audio
output between left and right speakers.
BassY :Press
CH+/- button and VOL+/ENTER button
to conrm, then press VOL+/- to increase or
decrease the level of the lower-pitched sounds.
TrebleY :Press
CH+/-CH+/- button and VOL+/
ENTER to conrm, then press
VOL+/- to increase
or decrease the level of the higher-pitched
sounds.
Sound surroundY : To turn the simulated surround
sound on or o.
EqualizerY : To adjust the equalizer O /Rock /Pop /Live
/Dance/ Techno /Classic and Soft.
SpeakerY : To adjust the speaker on or o.
SPDIF TypeY : To adjust the SPDIF output: O /Dolby
Digital and PCM.
AVLY : This will reduces the dierences in volume level
among broadcasters.
Audio OnlyY : Press VOL+/ENTER button to conrm,
the following display will appear on the screen:
Press VOL- to select OK, then press OK to conrm. The
TV screen will be black and no picture , but the sound
is still normal.
If enterAudio Only mode, press POWER to exit!
OK Cancel
You can press POWER button to reveal the picture on
the screen.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
Use the SAP button to select your desired MTS
A
mode in a analog signal. Each time you press the
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
Press EXIT button to save and return to TV viewing.
B
Channel Menu Options
Channel menu will appear in main menu only in TV
mode.
Press
A MENU button and CH+/- button until the
following menu appears on the screen.
Channel
Video
Audio
Channel
Lock
Function
Select
Back
EXIT
Tuner Mode Antenna
Channel Scan
Channel Skip
Channel Labels
Time Shifting Mode On
CH+/-
VOL+/-