Haier HL22XSL2 Flat Panel Television User Manual


 
Operation
EN-19 Haier LED HDTV
USB Input
Supporting media and file format: Digital pictures A
(.JPG/.JPEG/.BMP(Baseline & Progressive)/.PNG),
digital music (.MP3(8~320kbps)) and Video(.avi/.
mpg/.mpeg/.vro/.vob/.ts coded with MPEG-1 or
MPEG-2 standard) files.
Due to dierences in the file code and file mode, q
It is possible that some files cannot be read.
Before starting operation, verify USB storage
B
device is of FAT32 file system format. At present,
this television does not support NTFS and the file
systems of other format.
Supports USB/Memory Card Plug & Play (don't need
C
to reset TV system),USB Hard-drive support - only
support the class of USB HD that follows USB power
consumption spec.
The television operation may be halted due to
D
excessive rate of information code errors. In such
case, restart the system. Please note - there are many
nonstandard USB mobile devices in the market. If a
nonstandard device is used then an identification
problem may occur.
USB Media Menu operation
Plug-in an external storage device into USB port.A
Press B USB button on the remote to display
multimedia.
Press
C ENTER button on the remote to display the
sub page.
Press
D EXIT button on the remote to return to the
previous menu.
To play pictures
Press A USB button on the remote to enter USB media
system.The system start up takes about 3 seconds.
Then insert the USB drive in the USB input.q
Press B MENU button, and the press
CH+/- to select
Media Type , Press ENTER and press CH+/- to select
Photo.
Press C
CH+/-
/
VOL+/-
button to select
folder or le
, and
then press ENTER button to enter the play interface.
1. Play mode:
None/Dissolve/Wipe right/
Wipe left/Wipe up/Wipe
down/Box in/Box out/
Random
3. File name
4. Pause
5. Duration
2. Play time:
Short/Medium/Long
6. Eect
7. Information
Press
D MENU button to display the option list.
1. Play/Pause 4. Duration
2. Repeat 5. Eect
3. Shue 6. Information
Press the button on the remote control to select the
E
adjusted item, press ENTER button to confirm.