Haier LE55K800 Flat Panel Television User Manual


 
The slots on the case is designed to release heat so as to assure that all inside components will
not reach an extra high temperature and can work normally for a long time. Please do not cover
the holes while place it.
Unless there is good ventilation installation, please do not put
this machine in inlaid device.
Please do not place it on an unstable position so as to avoid
falling off.
Do not place the LCD TV near water source, like a bathtub,
pool, washing machine, or moist
When the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
The machine should not suffer from waterdrop or watersplash,
do not place the vessel with water (or other liquids) on it, for
like this it is possibly to cause fire or electric shock.
The attaching plug should be inserted into the power point completely, otherwise it may cause
spark to bring fire.
Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.
Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the
inner of radiation hole, in order to avoid short circuit and product damage, or possibly causing
electric shock. Especially pay attention when there are children on the spot.
cellar and similar environment.
During a thunder rain weather, do not touch the power cord and
antenna cable. Please pull out the power line and aerial plugs
for preventing thunder and lightning damage to this machine.
All cables can be connected or pull out only after power supply
is turned off.
The power cord must be taken off before you clean the machine.
Do not use the liquid cleanser or aerosol cleanser. It is
recommended to use a wet soft cloth to clean the machine. Do
not use the alcohol, impregnant or ammoniac liquid to wipe the
screen.
If you will not use the machine for a long time, please pull out
the power cord. Do not keep the sleeping mode for too long time.
Read the manual and marking label before using the machine, and keep the user manual for
later use.
Don't use the attachments which are not recommended by the machine manufacturer as they
may cause hazards.
The power cord must be placed correctly so as to avoid be trample or crush.
Please do not make the power socket overloaded or the power cord extended. Otherwise it will
cause fire or electrical shock.
The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please
do not use the hard thing to knock, press, score the panel. Otherwise it will be harmful for the
panel. The exchange cost is very high.
All technical specification on this instruction book and outer package are subject to change
without notice. If the instruction book has slight difference with actual operation, please take the
actual operation as standard.
Important Safety Instructions
2